Advertisement
parts2clean, 24 - 26 October 2017
Homepage>Exhibitors & Products >Coalescence Separator / Coalescer

Coalescence Separator / Coalescer

Logo Coalescence Separator / Coalescer

Exhibition stand

Hall 5, Stand B13
Open Exhibition Grounds map

Contact(s)
Mr. Thomas Dietrich
Research and Sales
Send E-mail
Mobile: +49 175 5922519
Fax: +49 6283 2220 50
Mr. Jochen Baumann
Research and Sales
Send E-mail
Fax: +49 6283 2220 50
Show all Show less

Product description

The inclined lamella coalescer is used to separate tramp oil and solid particles from liquids.
The coalescence separator can be made of steel (e.g. for cooling lubricants) or stainless steel (e.g. for decreasing baths).
The effluent is aspirated from the water- / emulsion-surface via a float gauge and pumped into the separator.
The soiled medium flows through the inclined lamellas. As tramp oil is lighter than water or emulsion, it floats on the top, whereas solid particles settle to the ground due to their weight.
Fine oil droplets deposit on the bottom side of the plates, join to form larger drops and finally ascent to the surface due to their buoyancy. The oil drops accumulate in the separator tubes, whereas the solid particles settle onto the top of the lamella and slide down into the sludge funnel.

Coalescers offer the following advantages:
- no risk of blockage through dirt particles due to inclined plates
- no chemical changes of the medium due to a purely mechanical
separation process
- bypass operation possible
- no break-down of emulsions, therefore suitable for the treatment of
cooling lubricants
- pumps rotate at slow speed to protect against dry-running and wear
- increased life of the cooling lubricant
- increased operating life of membrane systems due to pretreatment of
the effluent

All products offered by this exhibitor

Precoat Filter

The precoat filter is used for the filtration of particles being in the single-digit µm range. The actual filter which is used is a pressure or hinged belt filter. The filter belt being used is relatively coarse meshed. The fineness of the filtration is achieved by applying a precoat medium (e.g. cellulose) ...read more

Hinged Belt Filter

The hinged belt filter (HBF) is used for the filtration of liquids by means of a continuous filter of filter fleece. In comparison to hydrostatic filters, the HBF has the advantage that the filtration is performed at a higher pressure. Therefore a higher throughput and a better drainage of the filter ...read more

Pressure Belt Filter

The pressure belt filter (PBF) is used for the filtration of liquids by means of a continuous filter or filter fleece. In comparison to hydrostatic filters, the PBF has the advantage that the filtration is performed at a higher pressure. Therefore a higher throughput and a better drainage of the filter ...read more

Cooling Lubricant Central Plants

New ways in the cooling lubricant treatment: Cooling lubricant central plants. These are combined central plants to separate solid particles (material abrasion) and free oil from cooling lubricant circuits. - Separation of solid particles by sedimentation - Separation of free oils from the emulsion by ...read more

Coalescence Separator / Coalescer

The inclined lamella coalescer is used to separate tramp oil and solid particles from liquids. The coalescence separator can be made of steel (e.g. for cooling lubricants) or stainless steel (e.g. for decreasing baths). The effluent is aspirated from the water- / emulsion-surface via a float gauge and ...read more

Magnetic Separator

The magnetic separator is used to separate ferromagnetic particles from liquids (e.g. cooling lubricants). The effluent is fed into the magnetic separator from above. On its way to the outlet, the medium passes a magnetic drum. The very strong permanent magnet attracts the ferromagnetic particles, forcing ...read more

Vaccum Belt Filter

The vacuum belt filter (VBF) is used for the filtration of liquids by means of filter cloth (geotextiles). In comparison to hydrostatic filters, the VBF has the advantage of a vacuum assisted filtration. Therefore a higher throughput and a better drainage of the filter cake can be achieved. The filtration ...read more

Inclined Filter

The inclined filter, a hydrostatic working device, is used to filter liquids by means of filter fleece which is matched to the particular application. All parts in contact with media are made of stainless steel. The filter fleece is fed into the water chamber from the bottom. The filtration is performed ...read more

Filter Trolley ClearUp 250

With the newly developed filter trolley ClearUp 250, cooling lubricants of processing machines can be treated and tramp oil removed. The inclined filter SF 250, integrated in the filter trolley, removes dirt particles. The required fineness of filtration can be adjusted with different kind of filter ...read more

Stored items

0

Server communication error: Item could not be saved.