22 - 24 October 2019
The electrostaic oil cleaner removes particles, sludge and
varnish from hydraulic oil.
In order to operate hydraulic systems without failure, hydraulic systems are equipped with precise hightech components. Sludge, resin, varnish, and dirt particles in the oil cause friction, wear and malfunction of the hydraulic system. More than 80% of hydraulic failures are caused by impurities in the oil.
Just connect the electrostatic oil cleaner with two tubes with your hydraulic
tank and it will clean your oil independent from production. The hydraulic oil
is pumped through an electric field caused by 14,000 V between the electrodes in the cleaning cell. The electric field force attracts the particles onto the surface of the cleaning elements between the electrodes. The particles are stored on the surface of the cleaning elements, while the oil is returned to the main tank. The special design of the cleaning elements cause a turbulent flow between the electrodes. The turbulences flush the particles towards the surface of the cleaning elements. The result is a fast and effective cleaning. Particles down to 0.05 µm will be removed. The electrostatic oil cleaning has now influence to the liquid additives of the oil. The liquid additives remain in the oil while particles are removed by the electric field force. The high voltage of 14,000 V removes soft and hard particles as well as resins, oxydation products, sludge and varnish. The unique design makes sure that particles of all sizes will be collected in the cleaning cell. The result is an extreme clean oil. The clean oil is able to flush out sticky sludge from the system. Water in the oil can be removed by an optional dewatering cartridge. The cartridge is equipped with fibers that are able to absorb water. The fibres absorb the non-emulsified water and dry the oil.
Available models EFC D2, D4, D8 & D16 with different pump capacities
The decanter FRIESS Skimmtelligent is used at systems were oil is mixed with process fluid and does not float on the water surface.
VA MED Compact Plant is an easy-tooperate, easy-to-install compact waste water treatment plant. VA MED is a standardized, preassembled waste water treatment system.
VA MEC Compact plant is an easy-tooperate, easy-to-install compact waste water treatment plant. VA MEC is a standardized, preassembled waste water treatment system.
Simply, fast and easy the Friess VOD removes water, gas and dirt from hydraulic oil, turbine oil, and other mineral oils.
The vacuum oil dehydration ...
The Friess mobile magnetic filter system FMF removes particles from coolant, cutting oil, grinding oil and other process fluids.
The Friess Magnetic filter system FMF removes particles from coolant,
cutting oil, grinding oil and other process fluids.
Particles, which ...
Simlpe, quick and reliable removal of oil and fats floating an all kinds of liquids like coolant, degreasing agent, waste water by the Friess Oil Skimmer Model 1S.
The oil skimmer model W40 is designed to remove floating oil from all kind of basins with a minimum width of 800 mm. The lengths of the basin can be up to 20 m and ...
The oil skimmer model 1U is specially designed to remove floating oil from small coolant tanks and small degreasing baths with a surface of up to 1 m². The innovative ...
The oil skimmer model S 100 is designed to remove floating oil from large basins and tanks with changing water level.
Because of the special design, the oil skimmer ...
Many part washers use an oil skimmer in order to remove floating oil and sludge.Some of the oil skimmers remove not only oil but also water, because they reach only ...
The oil skimmer model WBS is special designed to remove floating oil from small tanks. The unique design of the belt skimmer WBS attracts the oil from the total ...