22 - 24 October 2019
Simply, fast and easy the Friess VOD removes water, gas and dirt from hydraulic oil, turbine oil, and other mineral oils.
The vacuum oil dehydration units neither remove nor alter oil additives. The water removal process is based on pure vacuum evaporation inside a vacuum chamber at a maximum temperature of 60 °C. Solid particle removal is achieved through a filter. The dehdration units do not require continous attention whilst operating. Once the dehydration units are connected properly and comissioned, oil purification is a semiautomatic process. The desired oil temperature can be selected on a thermostat which is includes in the integrated heater element of the dehydration units.
Oil supply and removal from the vacuum chamber is a full automatic process which is controlled by a PLC. Overflow of the waste container or tank is protected through a float switch which will shut down the dehydration unit once the maximum level is reached. The only manual action is the emptying of the precondenser and waste water container (depending on model).
Water, gas and particle removal:
The Friess VOD removes liquid, gas and solid contamination, which are corrosive and contribute to the reduction of machine life. Water, gas and solid particle contamination greatly increase maintenance costs and contribute to unwanted break downs or total machine failures. The Friess VOD system offers protection against malfunctions, break downs and total failures. The Friess VOD system protects the environment by reducing oil consumption and waste oil disposal along with its inherent costs and problems.
The decanter FRIESS Skimmtelligent is used at systems were oil is mixed with process fluid and does not float on the water surface.
VA MED Compact Plant is an easy-tooperate, easy-to-install compact waste water treatment plant. VA MED is a standardized, preassembled waste water treatment system.
VA MEC Compact plant is an easy-tooperate, easy-to-install compact waste water treatment plant. VA MEC is a standardized, preassembled waste water treatment system.
The electrostaic oil cleaner removes particles, sludge and
varnish from hydraulic oil.
In order to operate hydraulic systems without failure, ...
The Friess mobile magnetic filter system FMF removes particles from coolant, cutting oil, grinding oil and other process fluids.
The Friess Magnetic filter system FMF removes particles from coolant,
cutting oil, grinding oil and other process fluids.
Particles, which ...
Simlpe, quick and reliable removal of oil and fats floating an all kinds of liquids like coolant, degreasing agent, waste water by the Friess Oil Skimmer Model 1S.
The oil skimmer model W40 is designed to remove floating oil from all kind of basins with a minimum width of 800 mm. The lengths of the basin can be up to 20 m and ...
The oil skimmer model 1U is specially designed to remove floating oil from small coolant tanks and small degreasing baths with a surface of up to 1 m². The innovative ...
The oil skimmer model S 100 is designed to remove floating oil from large basins and tanks with changing water level.
Because of the special design, the oil skimmer ...
Many part washers use an oil skimmer in order to remove floating oil and sludge.Some of the oil skimmers remove not only oil but also water, because they reach only ...
The oil skimmer model WBS is special designed to remove floating oil from small tanks. The unique design of the belt skimmer WBS attracts the oil from the total ...