22 - 24 October 2019
New device series in the ph-cleantec low pressure hot cleaner familyLow pressure hot cleaning technology stands for environmentally friendly and resources saving cleaning systems which, for many years, universally are used in the production for the cleaning of machines, in the maintenance as well as for component degreasing and flexible cleaning of production parts With the 800 SR series ph-cleantec presents a new device range which is used particularly in the maintenance, repair and for cleaning of smaller production parts.The device combines, as all the other ph-cleantec cleaning systems, a low pressure (3 to 8 bar) with high medium temperature. The temperature is ranging between 70° C up to 90° C depending on the selected pressure and is generated in an electrical flow heater within 1 minute.The parts to be cleaned are placed on a water collector, the used and dirty water is recycled by means of a special recycling process and thus can be operatied in the cycle. The devices are mobile and require for the applications on-site only a power supply. Due to the physical active principle (high temperature and low pressure) aggressive chemicals and the typical disadvantages of a high-pressure cleaner by immense water quantities as well as damages and splash-back effects can be avoided.In conjunction with a range of interchangeable tools there additionally is the possibility to also clean in heavily accessible places compared with typical brush washstands. Also drillings and blind holes up to an inner diameter of 2 mm, pipes and curvatures, undercuts between plates of heat exchangers etc. are cleaned quickly and efficiently by the substitution of the respective tool by means of a quick-change coupling.
(Inside) Cleaning of holes
The cleaning of bores and pipes and can, in particular in the case of internal cleaning, pose a particular challenge for conventionally ...